API-Referenz für Entwickler

Einstieg

Damit Anfragen vom System verarbeitet werden können, ist ein API-Schlüssel erforderlich. Sobald sich ein Benutzer registriert, wird automatisch ein API-Schlüssel für diesen Benutzer generiert. Der API-Schlüssel muss mit jeder Anfrage gesendet werden (siehe vollständiges Beispiel unten). Wenn der API-Schlüssel nicht gesendet wird oder abgelaufen ist, wird ein Fehler angezeigt. Bitte achten Sie darauf, Ihren API-Schlüssel geheim zu halten, um Missbrauch zu verhindern.

Authentifizierung

Um sich beim API-System zu authentifizieren, müssen Sie bei jeder Anfrage Ihren API-Schlüssel als Autorisierungstoken senden. Unten sehen Sie einen Beispielcode.

curl --location --request POST 'https://linksdo.com/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \ 
$curl = curl_init();
curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/account",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
));

$response = curl_exec($curl);
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://linksdo.com/api/account',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: ''
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Bewertungslimit

Unsere API verfügt über einen Ratenbegrenzer zum Schutz vor Anfragenspitzen, um ihre Stabilität zu maximieren. Unser Ratenbegrenzer ist derzeit auf 30 Anfragen pro 1 Minute begrenzt. Please note that the rate might change according to the subscribed plan.

Neben der Antwort werden mehrere Header gesendet, die untersucht werden können, um verschiedene Informationen über die Anfrage zu ermitteln.

X-RateLimit-Limit: 30
X-RateLimit-Remaining: 29
X-RateLimit-Reset: TIMESTAMP
Antwortbehandlung

Alle API-Antworten werden standardmäßig im JSON-Format zurückgegeben. Um diese in verwertbare Daten umzuwandeln, muss je nach Sprache die entsprechende Funktion verwendet werden. In PHP kann die Funktion json_decode() verwendet werden, um die Daten entweder in ein Objekt (Standard) oder ein Array (den zweiten Parameter auf true zu setzen) zu konvertieren. Es ist sehr wichtig, den Fehlerschlüssel zu überprüfen, da er Auskunft darüber gibt, ob ein Fehler aufgetreten ist oder nicht. Sie können auch den Header-Code überprüfen.

{
    "error": 1,
    "message": "An error occurred"
}

Benutzerdefinierter Splash

List Custom Splash
GET https://linksdo.com/api/splash?limit=2&page=1

To get custom splash pages via the API, you can use this endpoint. You can also filter data (See table for more info).

ParameterBeschreibung
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://linksdo.com/api/splash?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/splash?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://linksdo.com/api/splash?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "splash": [
            {
                "id": 1,
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "name": "Product 2 Promo",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

CTA-Overlays

List CTA Overlays
GET https://linksdo.com/api/overlay?limit=2&page=1

To get cta overlays via the API, you can use this endpoint. You can also filter data (See table for more info).

ParameterBeschreibung
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://linksdo.com/api/overlay?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/overlay?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://linksdo.com/api/overlay?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "cta": [
            {
                "id": 1,
                "type": "message",
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "contact",
                "name": "Contact Page",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

Kampagnen

List Campaigns
GET https://linksdo.com/api/campaigns?limit=2&page=1

To get your campaigns via the API, you can use this endpoint. You can also filter data (See table for more info).

ParameterBeschreibung
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://linksdo.com/api/campaigns?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/campaigns?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://linksdo.com/api/campaigns?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "campaigns": [
            {
                "id": 1,
                "name": "Sample Campaign",
                "public": false,
                "rotator": false,
                "list": "https:\/\/domain.com\/u\/admin\/list-1"
            },
            {
                "id": 2,
                "domain": "Facebook Campaign",
                "public": true,
                "rotator": "https:\/\/domain.com\/r\/test",
                "list": "https:\/\/domain.com\/u\/admin\/test-2"
            }
        ]
    }
}
Erstellen Sie eine Kampagne
POST https://linksdo.com/api/campaign/add

A campaign can be added using this endpoint.

ParameterBeschreibung
name (optional) Campaign name
slug (optional) Rotator Slug
public (optional) Access
curl --location --request POST 'https://linksdo.com/api/campaign/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Campaign",
    "slug": "new-campaign",
    "public": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/campaign/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "New Campaign",
	    "slug": "new-campaign",
	    "public": true
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://linksdo.com/api/campaign/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "New Campaign",
    "slug": "new-campaign",
    "public": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": 0,
    "id": 3,
    "domain": "New Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/new-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/new-campaign-3"
}
POST https://linksdo.com/api/campaign/:campaignid/assign/:linkid

A short link can be assigned to a campaign using this endpoint. The endpoint requires the campaign ID and the short link ID.

curl --location --request POST 'https://linksdo.com/api/campaign/:campaignid/assign/:linkid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/campaign/:campaignid/assign/:linkid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://linksdo.com/api/campaign/:campaignid/assign/:linkid',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": 0,
    "message": "Link successfully added to the campaign."
}
Kampagne aktualisieren
PUT https://linksdo.com/api/campaign/:id/update

To update a campaign, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ParameterBeschreibung
name (required) Campaign name
slug (optional) Rotator Slug
public (optional) Access
curl --location --request PUT 'https://linksdo.com/api/campaign/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Twitter Campaign",
    "slug": "twitter-campaign",
    "public": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/campaign/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "Twitter Campaign",
	    "slug": "twitter-campaign",
	    "public": true
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://linksdo.com/api/campaign/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "Twitter Campaign",
    "slug": "twitter-campaign",
    "public": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": 0,
    "id": 3,
    "domain": "Twitter Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/twitter-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/twitter-campaign-3"
}
Delete Campaign
DELETE https://linksdo.com/api/campaign/:id/delete

To delete a campaign, you need to send a DELETE request.

curl --location --request DELETE 'https://linksdo.com/api/campaign/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/campaign/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://linksdo.com/api/campaign/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": 0,
    "message": "Campaign has been deleted successfully."
}

Kanäle

List Channels
GET https://linksdo.com/api/channels?limit=2&page=1

To get your channels via the API, you can use this endpoint. You can also filter data (See table for more info).

ParameterBeschreibung
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://linksdo.com/api/channels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/channels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://linksdo.com/api/channels?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "channels": [
            {
                "id": 1,
                "name": "Channel 1",
                "description": "Description of channel 1",
                "color": "#000000",
                "starred": true
            },
            {
                "id": 2,
                "name": "Channel 2",
                "description": "Description of channel 2",
                "color": "#FF0000",
                "starred": false
            }
        ]
    }
}
List Channel Items
GET https://linksdo.com/api/channel/:id?limit=1&page=1

To get items in a select channels via the API, you can use this endpoint. You can also filter data (See table for more info).

ParameterBeschreibung
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://linksdo.com/api/channel/:id?limit=1&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/channel/:id?limit=1&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://linksdo.com/api/channel/:id?limit=1&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "items": [
            {
                "type": "links",
                "id": 1,
                "title": "My Sample Link",
                "preview": "https:\/\/google.com",
                "link": "https:\/\/linksdo.com\/google",
                "date": "2022-05-12"
            },
            {
                "type": "bio",
                "id": 1,
                "title": "My Sample Bio",
                "preview": "https:\/\/linksdo.com\/mybio",
                "link": "https:\/\/linksdo.com\/mybio",
                "date": "2022-06-01"
            }
        ]
    }
}
Erstellen Sie einen Kanal
POST https://linksdo.com/api/channel/add

A channel can be added using this endpoint.

ParameterBeschreibung
name (required) Channel name
description (optional) Channel description
color (optional) Channel badge color (HEX)
starred (optional) Star the channel or not (true or false)
curl --location --request POST 'https://linksdo.com/api/channel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/channel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "New Channel",
	    "description": "my new channel",
	    "color": "#000000",
	    "starred": true
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://linksdo.com/api/channel/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": 0,
    "id": 3,
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}
Assign an Item to a Channel
POST https://linksdo.com/api/channel/:channelid/assign/:type/:itemid

An item can be assigned to any channel by sending a request with the channel id, item type (links, bio or qr) and item id.

ParameterBeschreibung
:channelid (required) Channel ID
:type (required) links or bio or qr
:itemid (required) Item ID
curl --location --request POST 'https://linksdo.com/api/channel/:channelid/assign/:type/:itemid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/channel/:channelid/assign/:type/:itemid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://linksdo.com/api/channel/:channelid/assign/:type/:itemid',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": 0,
    "message": "Item successfully added to the channel."
}
Kanal aktualisieren
PUT https://linksdo.com/api/channel/:id/update

To update a channel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ParameterBeschreibung
name (optional) Channel name
description (optional) Channel description
color (optional) Channel badge color (HEX)
starred (optional) Star the channel or not (true or false)
curl --location --request PUT 'https://linksdo.com/api/channel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Acme Corp",
    "description": "channel for items for Acme Corp",
    "color": "#FFFFFF",
    "starred": false
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/channel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "Acme Corp",
	    "description": "channel for items for Acme Corp",
	    "color": "#FFFFFF",
	    "starred": false
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://linksdo.com/api/channel/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "Acme Corp",
    "description": "channel for items for Acme Corp",
    "color": "#FFFFFF",
    "starred": false
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": 0,
    "message": "Channel has been updated successfully."
}
Delete Channel
DELETE https://linksdo.com/api/channel/:id/delete

To delete a channel, you need to send a DELETE request. All items will be unassigned as well.

curl --location --request DELETE 'https://linksdo.com/api/channel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/channel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://linksdo.com/api/channel/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": 0,
    "message": "Channel has been deleted successfully."
}

Konto

Konto erhalten
GET https://linksdo.com/api/account

Um Informationen über das Konto zu erhalten, können Sie eine Anfrage an diesen Endpunkt senden, der Daten über das Konto zurückgibt.

curl --location --request GET 'https://linksdo.com/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/account",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://linksdo.com/api/account',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": 0,
    "data": {
        "id": 1,
        "email": "sample@domain.com",
        "username": "sampleuser",
        "avatar": "https:\/\/domain.com\/content\/avatar.png",
        "status": "pro",
        "expires": "2022-11-15 15:00:00",
        "registered": "2020-11-10 18:01:43"
    }
}
Account aktualisieren
PUT https://linksdo.com/api/account/update

Um Informationen zu dem Konto zu aktualisieren, können Sie eine Anfrage an diesen Endpunkt senden und er aktualisiert die Daten zu dem Konto.

curl --location --request PUT 'https://linksdo.com/api/account/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "email": "newemail@google.com",
    "password": "newpassword"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/account/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "email": "newemail@google.com",
	    "password": "newpassword"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://linksdo.com/api/account/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "email": "newemail@google.com",
    "password": "newpassword"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": 0,
    "message": "Account has been successfully updated."
}

Markendomänen

List Branded Domains
GET https://linksdo.com/api/domains?limit=2&page=1

To get your branded domains via the API, you can use this endpoint. You can also filter data (See table for more info).

ParameterBeschreibung
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://linksdo.com/api/domains?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/domains?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://linksdo.com/api/domains?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "domains": [
            {
                "id": 1,
                "domain": "https:\/\/domain1.com",
                "redirectroot": "https:\/\/rootdomain.com",
                "redirect404": "https:\/\/rootdomain.com\/404"
            },
            {
                "id": 2,
                "domain": "https:\/\/domain2.com",
                "redirectroot": "https:\/\/rootdomain2.com",
                "redirect404": "https:\/\/rootdomain2.com\/404"
            }
        ]
    }
}
Create a Branded Domain
POST https://linksdo.com/api/domain/add

A domain can be added using this endpoint. Please make sure the domain is correctly pointed to our server.

ParameterBeschreibung
domain (required) Branded domain including http or https
redirectroot (optional) Root redirect when someone visits your domain
redirect404 (optional) Custom 404 redirect
curl --location --request POST 'https://linksdo.com/api/domain/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/domain/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "domain": "https:\/\/domain1.com",
	    "redirectroot": "https:\/\/rootdomain.com",
	    "redirect404": "https:\/\/rootdomain.com\/404"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://linksdo.com/api/domain/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": 0,
    "id": 1
}
Domäne aktualisieren
PUT https://linksdo.com/api/domain/:id/update

To update a branded domain, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ParameterBeschreibung
redirectroot (optional) Root redirect when someone visits your domain
redirect404 (optional) Custom 404 redirect
curl --location --request PUT 'https://linksdo.com/api/domain/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/domain/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "redirectroot": "https:\/\/rootdomain-new.com",
	    "redirect404": "https:\/\/rootdomain-new.com\/404"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://linksdo.com/api/domain/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": 0,
    "message": "Domain has been updated successfully."
}
Delete Domain
DELETE https://linksdo.com/api/domain/:id/delete

To delete a domain, you need to send a DELETE request.

curl --location --request DELETE 'https://linksdo.com/api/domain/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/domain/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://linksdo.com/api/domain/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": 0,
    "message": "Domain has been deleted successfully."
}

Pixel

List Pixels
GET https://linksdo.com/api/pixels?limit=2&page=1

To get your pixels codes via the API, you can use this endpoint. You can also filter data (See table for more info).

ParameterBeschreibung
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://linksdo.com/api/pixels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/pixels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://linksdo.com/api/pixels?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "pixels": [
            {
                "id": 1,
                "type": "gtmpixel",
                "name": "GTM Pixel",
                "tag": "GA-123456789",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "twitterpixel",
                "name": "Twitter Pixel",
                "tag": "1234567",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}
Create a Pixel
POST https://linksdo.com/api/pixel/add

A pixel can be created using this endpoint. You need to send the pixel type and the tag.

ParameterBeschreibung
type (required) gtmpixel | gapixel | fbpixel | adwordspixel | linkedinpixel | twitterpixel | adrollpixel | quorapixel | pinterest | bing | snapchat | reddit | tiktok
name (required) Custom name for your pixel
tag (required) The tag for the pixel
curl --location --request POST 'https://linksdo.com/api/pixel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/pixel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "type": "gtmpixel",
	    "name": "My GTM",
	    "tag": "GTM-ABCDE"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://linksdo.com/api/pixel/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": 0,
    "id": 1
}
Pixel aktualisieren
PUT https://linksdo.com/api/pixel/:id/update

To update a pixel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ParameterBeschreibung
name (optional) Custom name for your pixel
tag (required) The tag for the pixel
curl --location --request PUT 'https://linksdo.com/api/pixel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/pixel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "name": "My GTM",
	    "tag": "GTM-ABCDE"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://linksdo.com/api/pixel/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": 0,
    "message": "Pixel has been updated successfully."
}
Delete Pixel
DELETE https://linksdo.com/api/pixel/:id/delete

To delete a pixel, you need to send a DELETE request.

curl --location --request DELETE 'https://linksdo.com/api/pixel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/pixel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://linksdo.com/api/pixel/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": 0,
    "message": "Pixel has been deleted successfully."
}

QR-Codes

List QR codes
GET https://linksdo.com/api/qr?limit=2&page=1

Um Ihre QR-Codes über die API abzurufen, können Sie diesen Endpunkt verwenden. Sie können Daten auch filtern (weitere Informationen finden Sie in der Tabelle).

ParameterBeschreibung
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://linksdo.com/api/qr?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/qr?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://linksdo.com/api/qr?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "qrs": [
            {
                "id": 2,
                "link": "https:\/\/linksdo.com\/qr\/a2d5e",
                "scans": 0,
                "name": "Google",
                "date": "2020-11-10 18:01:43"
            },
            {
                "id": 1,
                "link": "https:\/\/linksdo.com\/qr\/b9edfe",
                "scans": 5,
                "name": "Google Canada",
                "date": "2020-11-10 18:00:25"
            }
        ]
    }
}
Holen Sie sich einen einzigen QR-Code
GET https://linksdo.com/api/qr/:id

Um Details für einen einzelnen QR-Code über die API abzurufen, können Sie diesen Endpunkt verwenden.

curl --location --request GET 'https://linksdo.com/api/qr/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/qr/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://linksdo.com/api/qr/:id',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": 0,
    "details": {
        "id": 1,
        "link": "https:\/\/linksdo.com\/qr\/b9edfe",
        "scans": 5,
        "name": "Google Canada",
        "date": "2020-11-10 18:00:25"
    },
    "data": {
        "clicks": 1,
        "uniqueClicks": 1,
        "topCountries": {
            "Unknown": "1"
        },
        "topReferrers": {
            "Direct, email and other": "1"
        },
        "topBrowsers": {
            "Chrome": "1"
        },
        "topOs": {
            "Windows 10": "1"
        },
        "socialCount": {
            "facebook": 0,
            "twitter": 0,
            "instagram": 0
        }
    }
}
Erstellen Sie einen QR-Code
POST https://linksdo.com/api/qr/add

To create a QR Code, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ParameterBeschreibung
type (required) text | vcard | link | email | phone | sms | wifi
data (required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background (optional) RGB color e.g. rgb(255,255,255)
foreground (optional) RGB color e.g. rgb(0,0,0)
logo (optional) Path to the logo either png or jpg
curl --location --request POST 'https://linksdo.com/api/qr/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/qr/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "type": "link",
	    "data": "https:\/\/google.com",
	    "background": "rgb(255,255,255)",
	    "foreground": "rgb(0,0,0)",
	    "logo": "https:\/\/site.com\/logo.png"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://linksdo.com/api/qr/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": 0,
    "id": 3,
    "link": "https:\/\/linksdo.com\/qr\/a58f79"
}
Update QR Code
PUT https://linksdo.com/api/qr/:id/update

Um einen QR-Code zu aktualisieren, müssen Sie gültige Daten in JSON über eine PUT-Anforderung senden. Die Daten müssen wie unten gezeigt als Rohtext Ihrer Anfrage gesendet werden. Das folgende Beispiel zeigt alle Parameter, die Sie senden können, aber Sie müssen nicht alle senden (siehe Tabelle für weitere Informationen).

ParameterBeschreibung
data (required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background (optional) RGB color e.g. rgb(255,255,255)
foreground (optional) RGB color e.g. rgb(0,0,0)
logo (optional) Path to the logo either png or jpg
curl --location --request PUT 'https://linksdo.com/api/qr/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/qr/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    CURLOPT_POSTFIELDS => 
        '{
	    "type": "link",
	    "data": "https:\/\/google.com",
	    "background": "rgb(255,255,255)",
	    "foreground": "rgb(0,0,0)",
	    "logo": "https:\/\/site.com\/logo.png"
	}',
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://linksdo.com/api/qr/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": 0,
    "message": "QR has been updated successfully."
}
Löschen Sie einen QR-Code
DELETE https://linksdo.com/api/qr/:id/delete

Um einen QR-Code zu löschen, müssen Sie eine DELETE-Anfrage senden.

curl --location --request DELETE 'https://linksdo.com/api/qr/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://linksdo.com/api/qr/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => [
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ],
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://linksdo.com/api/qr/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
Antwort des Servers
{
    "error": 0,
    "message": "QR Code has been deleted successfully."
}

Verknüpfungen